projects

Benchmark exercise for benchmarks/text-to-cad/01-rectangular-calibration-block; not intended for physical printing.

Benchmark exercise for benchmarks/text-to-cad/05-open-top-electronics-enclosure; not intended for physical printing.

Community front bumper for the PiCar-X, printed as-is. The exported STL is the reference mesh with six degenerate zero-volume sliver bodies removed and the part translated to the bed origin — geometry is otherwise untouched. Designer reports a snap fit in PLA; mount with plastic rivets or bolts. Non-commercial license, attribution required.

1U variant of 10in-2u-dual-pi5-panel; rack interface (254mm face, 236.5mm M6 slot columns, 44.45mm U) is the same authoritative Blanks_for_10__Racks.3mf extraction.

Same rack interface as the dual-pi5 panel (254mm face, 236.5mm M6 slot columns, 44.45mm U), corner slots only, printed faceplate-down.

Rack interface identical to the other Lab Rax panels (254mm face, 236.5mm M6 slot columns, 44.45mm U, 10x7mm horizontal fixing slots).

Rack interface extracted from the user's Blanks_for_10__Racks.3mf (254mm face, 236.5mm M6 slot columns, 44.45mm U). Fixing slots are 10x7mm horizontal; M6 bolt into rail nut.

[object Object]

Buy lacing bars and hook-and-loop before printing rack-specific clips.

Awaiting the generated GLB; build.py comes after. See README.md and notes/printability-decisions.md.

Cap brim overhangs forward (see side view render) — print standing with tree supports under brim and chin, or slice at 120 mm for a faster low-support print. Slicer infill keeps filament use modest despite solid volume.

Use a real tray for bulk routing; print only the custom endpoints.

Foot positions, pad recesses, and cable exits require physical measurement.

Foot positions, pad recesses, and cable exits require physical measurement.

Foot positions, pad recesses, and cable exits require physical measurement.